Наукова бібліотека Запорізького державного медичного університету

Пошуковий запит: <.>S=Characterization and Evaluation of Materials.<.>

Загальна кількість знайдених документів : 104
Показані документи с 1 за 20

    The Structural Integrity of Carbon Fiber Composites [Electronic resource] : fifty Years of Progress and Achievement of the Science, Development, and Applications / / ed.: Beaumont, Peter W. R., Soutis, Constantinos., Hodzic, Alma. - 1st ed. 2017. - [S. l. : s. n.]. - XIV, 969 p. 605 illus., 353 illus. in color. - ISBN 9783319461205
    Зміст:

Part I -- 1 50 years of carbon fibre 60 years in composite materials -- 2 But how can we make something useful out of black string?" The development of carbon fibre composites manufacturing 1965-2015 -- 3 Boron Fiber to Carbon Fiber -- 4 Serendipity in Carbon Fibres Interfaces and Interphases in Composites -- Part II -- Nano-engineered hierarchical carbon fibres and their composites preparation, properties, and multi-functionalities -- 5 Nano-engineered carbon fibre reinforced composites challenges and opportunities -- 6 A Nano-Micro-Macro Multi-Scale Model for Progressive Failure Prediction in Advanced Composites -- 7 Carbon fibre reinforced polymer laminates with nanofiller enhanced multi-functionality -- 8 Analysis models for polymer composites across different length scales -- 9 Analysis models for polymer composites across different length scales -- Part III -- 10 Microscale characterization techniques of Fibre Reinforced Polymers -- 11 Fibre Distribution and the Process Property Dilemma -- 12 Analysis of defect developments in composite forming -- Part IV -- 13 Deformation Mechanisms of Carbon Fibres and Carbon Fibre Composites -- 14 Micromechanical evidences on inter-fibre failure of composites -- 15 Progressive Damage in Fibre-Reinforced Composites Towards more Accurate and Efficient Computational Modelling and Analysis -- 16 Predicting properties of undamaged and damaged carbon fibre reinforced composites -- Part V -- 17 Composites Toughen up ! -- 18 Slow cracking in composite materials catastrophic fracture of composite structures -- 19 Finite fracture mechanics a useful tool to analyze cracking mechanisms in composite materials -- 20 Traction-separation relations in delamination of layered carbon-epoxy composites under monotonic loads Experiments and Modeling -- 21 Damage and failure analysis of bolted joints in composite laminates -- 22 City Cars made from Composites -- Part VI -- 23 A virtual testing approach for laminated composites based on micromechanics -- 24 Virtual testing of composite structures Progress and challenges in predicting damage, residual strength and crashworthiness -- 25 Contribution of virtual simulation to industrialisation of carbon fiber reinforced polymer composites for manufacturing processes and mechanical performance -- Part VII -- 26 Multi scale progressive failure modeling from Nano-structured carbon fibers to textile composites -- 27 Textile Structural Composites – from 3-D to 1-D fiber architecture -- 28 Experimental and Multiscale Numerical Studies of Woven Fabric Carbon Composite Cylinder Subjected to Internal Pressure Loading -- Part VIII -- 29 Fatigue of 2D and 3D carbon-fiber-reinforced polymer matrix composites and of a unitized polymer/ceramic matrix composite at elevated temperature -- 30 Carbon Fibers in Tribo-Composites.

Рубрики: Ceramics.
   Glass.
   Composites (Materials).
   Composite materials.
   Materials science.
   Ceramics, Glass, Composites, Natural Materials.
   Characterization and Evaluation of Materials.
Анотація: This book brings together a diverse compilation of inter-disciplinary chapters on fundamental aspects of carbon fiber composite materials and multi-functional composite structures: including synthesis, characterization, and evaluation from the nano-structure to structure meters in length. The content and focus of contributions under the umbrella of structural integrity of composite materials embraces topics at the forefront of composite materials science and technology, the disciplines of mechanics, and development of a new predictive design methodology of the safe operation of engineering structures from cradle to grave. Multi-authored papers on multi-scale modelling of problems in material design and predicting the safe performance of engineering structure illustrate the inter-disciplinary nature of the subject. The book examines topics such as Stochastic micro-mechanics theory and application for advanced composite systems Construction of the evaluation process for structural integrity of material and structure Nano- and meso-mechanics modelling of structure evolution during the accumulation of damage Statistical meso-mechanics of composite materials Hierarchical analysis including "age-aware," high-fidelity simulation and virtual mechanical testing of composite structures right up to the point of failure. The volume is ideal for scientists, engineers, and students interested in carbon fiber composite materials, and other composite material systems.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Beaumont, Peter W. R. \ed.\; Soutis, Constantinos. \ed.\; Hodzic, Alma. \ed.\
Вільних прим. немає
Знайти схожі

    Tanaka, Nobuo.
    Electron Nano-Imaging [Electronic resource] : basics of Imaging and Diffraction for TEM and STEM / / Nobuo. Tanaka ; . - 1st ed. 2017. - [S. l. : s. n.]. - XXVIII, 333 p. 129 illus., 22 illus. in color. - ISBN 9784431565024
    Зміст:

Seeing nanometer-sized world -- Structure and imaging of a transmission electron microscope (TEM) -- Basic theories of TEM imaging -- Resolution and image contrast of a transmission electron microscope (TEM) -- What is high-resolution transmission electron microscopy ? -- Lattice images and structure images -- Imaging theory of high-resolution TEM and image simulation -- Advanced transmission electron microscopy -- What is scanning transmission electron microscopy (STEM)? -- Imaging of scanning transmission electron microscopy (STEM) -- Image contrast and its formation mechanism in STEM -- Imaging theory for STEM -- Future prospects and possibility of TEM and STEM -- Concluding remarks -- Introduction of Fourier transforms for TEM and STEM -- Imaging by using a convex lens: Convex lens as phase shifter -- Contrast transfer function of a transmission electron microscope: Key term for understanding of phase contrast in HRTEM -- Complex-valued expression of aberrations of a round lens -- Cowley's theory for TEM and STEM imaging -- Introduction to the imaging theory for TEM including non-linear terms -- What are image processing methods? -- Elemental analysis by electron microscopes: Analysis using an electron probe -- Electron beam damage to specimens -- Scattering of electrons by an atom: Fundamental process for visualization of a single atom by TEM -- Electron diffraction and convergent beam electron diffraction (CBED): Basis for formation of lattice fringes in TEM and image intensity of STEM -- Bethe's method for dynamical electron diffraction: Basic theory of electron diffraction in thicker crystals -- Column approximation and Howie-Whelan's method for dynamical electron diffraction: Theory for observation of lattice defects -- Van-Dyck's method for dynamical electron diffraction and imaging: Basis of atomic column imaging -- Eikonal theory for scattering of electrons by a potential -- Debye-Waller factor and thermal diffuse scattering (TDS) -- Relativistic effects to diffraction and imaging by a transmission electron microscope: Basic theories for high-voltage electron microscopy.

Рубрики: Materials science.
   Spectroscopy.
   Microscopy.
   Nanoscale science.
   Nanoscience.
   Nanostructures.
   Characterization and Evaluation of Materials.
   Spectroscopy and Microscopy.
   Spectroscopy/Spectrometry.
   Nanoscale Science and Technology.
Анотація: In the present book, the basics of imaging and diffraction in transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) are explained in textbook style. The book focuses on the explanation of electron microscopic imaging of TEM and STEM without including in the main text distracting information on basic knowledge of crystal diffraction, wave optics, mechanism of electron lens, and scattering/diffraction theories, which are explained in detail separately in the appendices. A comprehensive explanation is provided using Fourier transform theory. This approach is unique in comparison with other advanced textbooks on high-resolution electron microscopy. With the present textbook, readers are led to understand the essence of the imaging theories of TEM and STEM without being diverted by facts about electron microscopic imaging. The up-to-date information in this book, particularly for imaging details of STEM and aberration corrections, is valuable worldwide for today’s graduate students and professionals just starting their careers.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Tanaka, Nobuo. \.\
Вільних прим. немає
Знайти схожі

    Advances in Shape Memory Materials [Electronic resource] : in Commemoration of the Retirement of Professor Hisaaki Tobushi / / ed. Sun, Qingping. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - X, 241 p. - ISBN 9783319533063
    Зміст:

Рубрики: Materials science.
   Engineering design.
   Energy storage.
   Robotics.
   Automation.
   Characterization and Evaluation of Materials.
   Engineering Design.
   Energy Storage.
   Robotics and Automation.
Анотація: This book is devoted to the development of the shape memory materials and their applications. It covers many aspects of smart materials. It also describes the method on how we can obtain not only large recovery strains but also high recovery stress, energy storage and energy dissipation in applications. This volume treats the mechanical properties of shape memory alloys, shape memory polymers and the constitutive equations of the materials which are necessary to design the shape memory elements in applications. It also deals with the fatigue properties of materials, the method to design the shape memory elements, and the shape memory composites. The authors are international experts on shape memory alloys and shape memory polymers in the metallurgical, chemical, mechanical and engineering fields. The book will be of interest to graduate students, engineers, scientists and designers who are working in the field of electric and mechanical engineering, industries, medical engineering, aerospace engineering, robots, automatic machines, clothes and recycling for research, design and manufacturing.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Sun, Qingping. \ed.\; Matsui, Ryosuke. \ed.\; Takeda, Kohei. \ed.\; Pieczyska, Elżbieta A. \ed.\
Вільних прим. немає
Знайти схожі

    Phan-Thien, Nhan.
    Understanding Viscoelasticity [Electronic resource] : an Introduction to Rheology / / Nhan. Phan-Thien, Mai-Duy, Nam. ; . - 3rd ed. 2017. - [S. l. : s. n.]. - XVIII, 304 p. 74 illus., 18 illus. in color. - ISBN 9783319620008
    Зміст:

Рубрики: Fluids.
   Polymers  .
   Mechanics.
   Mechanics, Applied.
   Amorphous substances.
   Complex fluids.
   Materials science.
   Fluid- and Aerodynamics.
   Polymer Sciences.
   Solid Mechanics.
   Soft and Granular Matter, Complex Fluids and Microfluidics.
   Characterization and Evaluation of Materials.
Анотація: This book presents an introduction to viscoelasticity, in particular, to the theories of dilute polymer solutions and dilute suspensions of rigid particles in viscous and incompressible fluids. These theories are important, not just because they apply to practical problems of industrial interest, but because they form a solid theoretical base upon which mathematical techniques can be built, from which more complex theories can be constructed, to better mimic material behaviour. The emphasis of this book is not on the voluminous current topical research, but on the necessary tools to understand viscoelasticity. This is a compact book for a first year graduate course in viscoelasticity and modelling of viscoelastic multiphase fluids. The Dissipative Particle Dynamics (DPD) is introduced as a particle-based method, relevant in modelling of complex-structured fluids. All the basic ideas in DPD are reviewed. The third edition has been updated and expanded with new results in the meso-scale modelling, links between the fluid modelling to its physical parameters and new matlab programs illustrating the modelling. Particle-based modelling techniques for complex-structure fluids are added together with some sample programs. A solution manual to the problems is included.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Mai-Duy, Nam.; Phan-Thien, Nhan. \.\
Вільних прим. немає
Знайти схожі

    Alderliesten, René.
    Fatigue and Fracture of Fibre Metal Laminates [Electronic resource] / René. Alderliesten ; . - 1st ed. 2017. - [S. l. : s. n.]. - XII, 300 p. 189 illus., 116 illus. in color. - ISBN 9783319562278
    Зміст:

Рубрики: Mechanics.
   Mechanics, Applied.
   Materials science.
   Aerospace engineering.
   Astronautics.
   Theoretical and Applied Mechanics.
   Characterization and Evaluation of Materials.
   Aerospace Technology and Astronautics.
Анотація: This book contributes to the field of hybrid technology, describing the current state of knowledge concerning the hybrid material concept of laminated metallic and composite sheets for primary aeronautical structural applications. It is the only book to date on fatigue and fracture of fibre metal laminates (FMLs). The first section of the book provides a general background of the FML technology, highlighting the major FML types developed and studied over the past decades in conjunction with an overview of industrial developments based on filed patents. In turn, the second section discusses the mechanical response to quasi-static loading, together with the fracture phenomena during quasi-static and cyclic loading. To consider the durability aspects related to strength justification and certification of primary aircraft structures, the third section discusses thermal aspects related to FMLs and their mechanical response to various environmental and acoustic conditions.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Alderliesten, René. \.\
Вільних прим. немає
Знайти схожі

    8th International Symposium on High-Temperature Metallurgical Processing [Electronic resource] / ed. Hwang, Jiann-Yang. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XXII, 818 p. 421 illus. - ISBN 9783319513409
    Зміст:

Part 1: Energy Efficient Clean Metallurgical Technology -- Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work -- Synthesis of Chromite for Subsequent Carburization by Methane-hydrogen Gas Mixture -- Effects of Hydrogen-enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens under BF Operation with Cog Injection -- Microwave-intensified Reduction of Biochar-containing Briquettes -- Refractory Challenges in Lead Recycling Furnaces -- Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix -- Part 2: Simulation of High Temperature Process -- A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor -- A Continuous Dynamic Process Model to Design a Carbon Profile toward Yield Improvement -- Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process -- Analysis of Jet Behavior and Surface Fluctuations in the Meniscus of Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling -- CFD Study of Gas-liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting -- Debottlenecking High Temperature Metallurgical Plants through Modeling and Simulation -- Assessment of Slag Entrainment in a RH Degasser through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag -- Part 3: Fundamental Research of Metallurgical Process -- Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels -- Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon -- Thermodynamic and Experimental Investigations of High Temperature Refractory Corrosion by Molten Slags -- Thermodynamic Calculation on the Reactivity between Slag and Ti-stabilized Stainless Steel -- Part 4: Alloys and Materials Preparation -- Development of a Novel, Low-cost Titanium Extraction Process for Bulk or Powder Applications -- Evolution of Non-metallic Inclusions in Solid Fe-Al-Ti-N Alloy during Heating -- Preparation of Low-carbon Ti2O3 by Carbon thermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon under Vacuum Condition -- Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves -- Trace Elements Behavior during the Oxidation of Liquid SiMn Alloy -- Effect of Microalloy Elements V And Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel -- Part 5: Extraction and Recovery of Metals -- Effect of Carbon Reductant On The Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation -- Cohering Behavior of Scrap Powder in Kiln by a Novel Natural Stacking Method -- Direct-to-blister Copper Smelting with the ISASMELT™ Process -- Improving Separation of Cu-Fe from Copper Slag by Mineral Phase Reconstruction -- Phase Transformation of High Calcium Type Tin, Iron-bearing Tailings during Magnetizing Roasting Process -- Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating -- Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-leaching Process -- Part 6: Ironmaking and Steelmaking -- Influence of Puhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process -- Formation Mechanisms of Inclusions in Spring Steels -- Investigation on Coal Combustion Behaviors under the Oxygen Blast Furnace -- Inclusion Control with Ca Treatment to Improve Castability of a Low Carbon Al Killed Steel -- High Temperature Mineralization Mechanism of Granules during Iron Ore Sintering Process -- Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace -- Part 7: Treatment and Recycling of Slag/Wastes -- Introduction of Matte Droplets in Copper Smelting Slag -- Dissolution Behavior of Fe from Glassy Oxide Phase in Steelmaking Slag -- Penetration Depth of Microwave in Tire Rubber -- Effect of TiO2 on Thermophysical Properties and Structure of P-bearing Steelmaking Slags -- Analysis for Optimum Conditions for Recovery of Valuable Metals from E-Waste through Black Copper Smelting -- Precipitation Behavior of MxTi3-xO5 in the Titanium-Bearing Electric Furnace Slag -- Part 8: Utilization of Complex Ores -- Evaluation of Molybdenum Concentrates -- Intensification of Gold Leaching from a Multi-refractory Gold Concentrate by the Two-stage Roasting-alkaline Sulfide Washing-cyanidation Process -- The Recovery of Cobalt from Copper Converter Slag by Reduction-sulfurization Smelting at High Temperature -- Roasting of Celestite in Laboratory Scale Rotary Furnace -- The Experimental Study of CaCO3 in the Vanadium Extraction Process -- The Extraction of Zinc from Zinc Ferrite by Calcified Roasting and Ammonia Leaching Process -- Part 8: Poster I -- A New Method to Detect the High Temperature Distribution in the Ironmaking and Steelmaking Industry -- A Study for Reconstructing the Three-dimensional Temperature Field of a Blast Furnace Raceway Based on Monte Carlo Method -- Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum -- Effect of CaO Addition on the Behavior of Vanadium and Phosphorus during Oxidation and Leaching Process -- Effect of Inner Shape on Blast Furnace Performance for Iron Making -- Effect of Lance Configurations on Coal Flow and Combustion Characteristics -- Effect of Silicon on Removal of Phosphorus from High Phosphorus Si-Mn alloy by CaO-Based Slag -- Effect of Super Gravity on the Solidification Structure and C Segregation of High Carbon Steel -- High Temperature Distribution Measurement of the Blast Furnace Raceway through Imaging Techniques and Optimization Algorithms -- Kinetics and Reduction Behavior of Self-reducing Briquettes Containing Blast Furnace Dust -- Model Analysis of the Phenomena of Pulverized Coal Injection in Blast Furnace -- Sintering Performance of Blends Containing High Proportion of Limonite Iron Ore Fines -- Thermodynamics Study on Phosphorus Distribution between 2CaO•SiO2-3CaO•P2O5 Solid Solution and Liquid Slag -- Two-step Copper Smelting Process at Dongying Fangyuan -- Part 9: Poster II -- Comparison of the Ringing Characteristics between Acid and Alkaline Iron Ore Pellets Powder in Kiln -- Comprehensive Utilization of Ludwigite Iron Concentrate by Gas-based Direct Reduction -- Decarburization of Spent Petrochemical Catalysts via Microwave Oxidation Roasting -- Effect of FeO Content in Laterite Nickel Slag on the Corrosioin Behaviour of Refractory Materials -- Effects of Blowing Conditions on the Dispersion States of Materials Charged into Bottom Blown Oxygen Smelting Furnace -- Effects of Pre-oxidation and Additives on Carbothermic Reduction of Ilmenite Concentrate -- Influence of Converter Slag on Decomposition Behavior of Limestone during BOF Steelmaking Process -- Influence of Hot Charge on Blast Furnace Performance for Iron Making -- Investigation and Application of Evolution System of Stock Surface Gas Flow Distribution in Blast Furnace -- Investigation of the Carbothermic Reduction of Chromium-containing Vanadium Extraction Residue -- Molecular Dynamics Study of the Structural Properties with Varying -- One-step Extraction of Lead from Spent Lead-acid Battery Paste via Reductive Sulfur-fixing Smelting: Thermodynamic Analysis -- Removal of Cd(II) Ion from Aqueous Solution by Adsorption on Wasted Low Grade Phosphorus-containing Iron Ore -- Research on the Flow Behavior of Molten Slag through Pore -- Study on the Influence of Materials on Heat Transfer Characteristics of Blast Furnace Cooling Staves.

Рубрики: Materials science.
   Metals.
   Engineering—Materials.
   Characterization and Evaluation of Materials.
   Metallic Materials.
   Materials Engineering.
Анотація: This collection features contributions covering the advances and developments of new high-temperature metallurgical technologies and their applications to the areas of: processing of minerals; extraction of metals; preparation of metallic, refractory, and ceramic materials; treatment and recycling of slag and wastes; conservation of energy; and environmental protection. The volume will have a broad impact on the academics and professionals serving the metallurgical industries around the world by providing them with comprehensive coverage of a wide variety of topics.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Hwang, Jiann-Yang. \ed.\; Jiang, Tao. \ed.\; Kennedy, Mark William. \ed.\; Yücel, Onuralp. \ed.\; Pistorius, P. Chris. \ed.\; Seshadri, Varadarajan. \ed.\; Zhao, Baojun. \ed.\; Gregurek, Dean. \ed.\; Keskinkilic, Ender. \ed.\
Вільних прим. немає
Знайти схожі

    Characterization of Minerals, Metals, and Materials 2017 [Electronic resource] / ed. Ikhmayies, Shadia. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XXIX, 872 p. 480 illus. - ISBN 9783319513829
    Зміст:

Part 1: Soft Materials -- Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites -- Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique -- Izod impact tests in polyester matrix composites reinforced with blanket of the malva and jute fibers -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Eucalyptus Fibers -- The dimensional characterization of jute fabric strips for reinforcement in composite polymeric -- Izod Toughness Behavior of Continuous PALF Fibers Reinforced Polyester Matrix Composites -- Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide -- Radiation Effects on Crosslinking of Butyl Rubber Compounds -- Part 2: Clays and Ceramics -- Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer -- Aging behaviour in Ni0.5CoxMn2.5-xO4 (x=0.5, 0.8 and 1.1) thermistors -- Adsorption of lead from aqueous solutions to bentonite and composite -- Part 3: Electronic, Magnetic, Environmental, and Advanced Materials -- Characterization Of Low-Zinc Electric Arc Furnace Dust -- GAMMA-RADIATION EFFECT ON BIODEGRADABILITY OF SYNTHETIC PLA STRUCTURAL FOAMS PP/HMSPP BASED -- STUDY OF FLEXIBLE FILMS PREPARED FROM PLA/PBAT BLEND AND PLA e-BEAM IRRADIATED AS COMPATIBILIZING AGENT -- Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method -- Part 4: Nano Materials -- Electrical and microstructural investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 temperature sensors -- Enhanced physical properties of thin film nanocomposites -- A study on the size and type of inclusions in Si-Mn combined deoxidated low carbon steel strip -- Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-powder Composites -- Part 5: Alloys -- Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101 -- MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V -- Part 6: Powders and Foams -- SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE -- Application of AFM in Morphology Determination of Powder Material -- Effects of Thermal Processing on Closed-Cell Aluminium Foams -- Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact -- Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact -- Part 7: Minerals -- INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED BY MILD ACID ATTACK -- Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation -- Ore Dressing and Technological characterization of Palygorskite from Piauí/Brazil for applications as adsorbent of heavy metals -- TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM -- Synthesis and Characterization of Sodalite and Cancrinita from Kaolin -- Part 8: Ferrous Metals -- Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter -- Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis -- Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres -- Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors -- Important Factors to Consider in FIB Milling of Crystalline Materials -- Part 9: Material Processing and Corrosion -- Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media -- Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile -- Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion -- Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique -- Part 10: Method Development -- Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide -- Part 11: Composites -- High thermal conducting composites using percolation theory -- SORPTION CHARACTERISTICS OF LOW DENSITY POLYETHYLENE/KOLA NUT COMPOSITE -- Residual Stress Analysis within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Pure Ramie Fabric -- Hemp Fiber Density Using the Pycnometer Technique -- Preparation and Characterization of Clay Exfoliation and Vegetal fibre on Properties of Recycled Low Density Polyethylene (rLDPE) -- Part 12: Ferrous Metals -- Estimation of Dislocation Density in Metals from Microhardness Test -- Part 13: Welding and Solidification -- Interfacial strength characterization in a high-modulus low-density steel-based Fe-TiB2 composite -- Part 14: Materials Extractions -- Leaching of Copper-Cobalt Tailings from the Democratic Republic of Congo -- OPTIMUM OPERATING CONDITIONS FOR EXTRACTION OF LIGNIN PRECURSORS FROM PALM FRUIT BUNCH -- SELECTION ON THE PROCESS FOR ENRICHING GOLD FROM REFRACTORY GOLD ORES BY SMELTING -- SELECTION ON THE PROCESS FOR REMOVING AND RECOVERING ANTIMONY FROM ANTIMONIAL REFRACTORY GOLD ORES -- Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings -- CHARACTERIZATION OF SPENT PRINTED CIRCUIT BOARDS FROM COMPUTERS -- Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte -- Part 15: Poster Session -- Addition of Cellulose Nanofibers in Reactive Powder Concrete -- ADVANCED ION COLUMN SOLUTION FOR LOW ION DAMAGE CHARACTERIZATION AND ULTRA-FINE PROCESS -- Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise -- Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal -- Characteristics of stamp charging coke and top charging coke -- Characterization and leaching proposal of Ag ( I) from a Zn concentrate -- Characterization and Mechanical Properties of Additively Manufactured Stainless Steel 316L -- CHARACTERIZATION OF MERCURY JAROSITE -- Characterization of steel production dust and their use in structural ceramics -- CHARPY TOUGHNESS BEHAVIOR OF JUTE FABRIC REINFORCED POLYESTER MATRIX COMPOSITES -- Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo -- Contribution to the ß relaxation study of the HDPE, LDPE and LLDPE -- Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES -- Effects of wet grinding on the structure and granularity of biological origin aragonite and its polymorphic transformation into calcite -- EVALUATION OF BALLISTIC ARMOR BEHAVIOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS -- EVALUATION OF THE POZZOLANIC ACTIVITY OF RESIDUE FROM THE PAPER INDUSTRY -- EVALUATION OF THE PROPERTIES OF THE ADHESIVE MORTAR IN THE FRESH STATE WITH ADDITION OF GLASS WASTE -- Experimental Evaluation of the Influence of Mortar’s Mechanical Properties on The Behavior of Clay Masonry -- Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method -- Polymer Blend based on recycled polyethylene and ethylene vinyl acetate copolymers reinforced with natural fibers from agricultural wastes -- Preliminary study of the effect of stirring rate, temperature and oxygen pressure on the leach rate of copper powder, generated by grinding of printed circuit boards of computer -- Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles -- Production of concrete interlocking blocks with partial replacement of sand in bulk by waste glass machined -- Reactive Powder Concrete Production with the Addition of Granite Processing Waste -- Research on the reason of the different type of chloride forming in the process of blast furnace ironmaking -- Stress and Deformation Analysis of Hot Blast Stove Piping System -- Stress and Deformation Analysis of Top Combustion Hot Blast Stove Shell -- STUDY OF CALCINED MIXTURES FROM INDUSTRIAL RESIDUES FOR PRODUCTION OF AGGLOMERATES -- STUDY OF SYNERGISTIC EFFECT OF LIGHT STABILIZER ADDITIVE, CONVENTIONAL AND NANOPARTICLES, APPLIED TO POLYETHYLENE FILMS SUBMITTED TO ULTRAVIOLET RADIATION -- Study of the effect of surface liquid flow during column flotation of mining tailing of the Dos Carlos dam -- STUDY ON BENDING TEST ON CONCRETE STRUCTURAL USE CRUMB RUBBER AS SUBSTITUTE IN FINE AGGREGATE -- Synthesis and structural characterization of BaTiO3 doped with Gd3+ -- Texture analysis and anisotropic properties of a rolled CuZn36 brass alloy -- The influence of titanium content on the sinter ore phase structure and the crack -- The use of Network Simplex method for planning the incorporation of recycled paper mill sludge in manufacturing of ceramic bodies -- USE OF ALKALINE SOLID WASTES FROM KRAFT PULP AND PAPER MILLS, DREGS AND GRITS IN CEMENT PRODUCTION -- Wood-to-concrete joints using steel connectors: experimental evaluation.

Рубрики: Materials science.
   Structural materials.
   Engineering—Materials.
   Characterization and Evaluation of Materials.
   Structural Materials.
   Materials Engineering.
Анотація: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Coverage is well-rounded from minerals, metals, and materials characterization and developments in extraction to the fabrication and performance of materials. In addition, topics as varied as structural steels to electronic materials to plant-based composites are explored. The latest research presented in this wide area make this book both timely and relevant to the materials science field as a whole. The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials. Topics covered include ferrous materials, non-ferrous materials, minerals, ceramics, clays, soft materials, method development, processing, corrosion, welding, solidification, composites, extraction, powders, nanomaterials, advanced materials, and several others.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Ikhmayies, Shadia. \ed.\; Li, Bowen. \ed.\; Carpenter, John S. \ed.\; Li, JIan. \ed.\; Hwang, Jiann-Yang. \ed.\; Monteiro, Sergio Neves. \ed.\; Firrao, Donato. \ed.\; Zhang, Mingming. \ed.\; Peng, Zhiwei. \ed.\; Escobedo-Diaz, Juan P. \ed.\; Bai, Chenguang. \ed.\; Kalay, Yunus Eren. \ed.\; Goswami, Ramasis. \ed.\; Kim, Jeongguk. \ed.\
Вільних прим. немає
Знайти схожі

    Energy Materials 2017 [Electronic resource] / ed. Liu, Xingbo. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XXII, 457 p. 256 illus. - ISBN 9783319523330
    Зміст:

Part 1: Energy and Environmental Issues in Materials Manufacturing and Processing: Opportunities in the Steel Industry -- Waste Energy Recovery Technology of Iron and Steel Industry in China -- Green Manufacturing Process of Shougang Jingtang Steel Plant -- The Introduction and Process Optimization Research of Oxygen Blast Furnace Ironmaking Technology -- Prediction and optimal scheduling of byproduct gases in steel mill: Trends and challenges -- Processing Non-Oriented Electrical Steels Using Inclined/Skew Rolling Schemes -- A Possible Way for Efficient Utilization of Coal Energy: The Combined Process of Ironmaking with Gasoline Synthesis and Electricity Generation -- The influence of water vapour on the fuming rate in a ferromanganese system -- Part 2: Energy and Environmental Issues in Materials Manufacturing and Processing: Opportunities in Aluminum Production, Waste Heat and Water Recovery -- Approach for pyrolysis gas release modelling and its potential for enhanced energy efficiency of aluminium remelting furnaces -- Numerical approach for the implementation of the interaction of pyrolysis gases and combustion products in an aluminium melting furnace -- Fluoropolymer Coated Condensing Heat Exchangers for Low-grade Waste Heat Recovery -- Nitrate and other anion removal from waste water using the Hydroflex technology -- Mechanical Analysis of Raceway Formation in Bulk Bed of Blast Furnace -- Part 3: Materials for Coal-Based Power: Materials For Coal-Based Power: Session I -- Ni-Fe based alloy GH984G used for 700 coal-fired power plant -- Part 4: Materials for Coal-Based Power: Materials For Coal-Based Power: Session II -- Creep strength and oxidation resistance of industrially made G115 Steel pipe -- Accelerated creep test for new steels and welds -- Part 5: Materials for Coal-Based Power: Materials For Coal-Based Power: Session IV -- The Reliability Analysis of 12Cr1MoVG and T23 Used for USC Boilers Water Wall -- Part 6: Materials for Coal-Based Power: Poster Session -- Effect of high-frequency induction hardening on stress corrosion of a 12% Cr martensitic stainless steel -- Fireside corrosion behaviors of Inconel 740 H superalloy in various SO2 contents -- High Cycle Fatigue Behavior of HAYNES282 Superalloy -- Recent Development in the Characteristics of Alloy 625 for A-USC Steam Turbine Castings -- Part 7: Materials for Gas Turbines: Coatings -- EVOLUTION OF THE THERMAL CONDUCTIVITY OF Sm2Zr2O7 UNDER CMAS ATTACK -- Part 8: Materials for Gas Turbines: Hot Corrosion and New Materials -- Development of a new high strength and hot corrosion resistant directionally solidified superalloy DZ409 -- Part 9: Materials for Gas Turbines: Microstructure and Processing -- Modeling the Diffusion of Minor Elements in Different MCrAlY – Superalloy Substrates at High Temperature -- ON HEALING MECHANISM OF CAST POROSITIES IN CAST NI-BASED SUPERALLOY BY HOT ISOSTATIC PRESSING -- The Influence of Dendritic Segregation Degree to the Recrystallization Nucleation in U4720LI -- Part 10: Materials for Gas Turbines: Poster Session -- Stress Rupture Properties of Alloy 783 -- Study on the Undercoolability and Single Crystal Castability of Nickel-Based Superalloys -- Part 11: Materials for Nuclear Energy: Materials for Nuclear Applications I -- Enhancing the High-Cycle Fatigue Property of 316 Austenitic Stainless Steels through Introduction of Mechanical Twins by Cold-Drawing -- Part 12: Materials for Nuclear Energy: Materials for Nuclear Applications II -- Microstructure Evolution of a Reactor Pressure Vessel Steel during High-temperature Tempering -- Part 13: Materials for Nuclear Energy: Environmental Effects -- Effect of Steam Pressure on the Oxidation Behaviour of Alloy 625 -- Friction Stir Processing of Degraded Austenitic Stainless Steel Nuclear Fuel Dry Cask Storage System Canisters -- Part 14: Materials for Nuclear Energy: Accident Tolerant Fuels & Irradiation Effects -- The Mechanical Response of Advanced Claddings during Proposed Reactivity Initiated Accident Conditions -- First principles investigations of alternative nuclear fuels -- Comparative study of thermal conductivity of SiC and BeO from ab initio calculations -- Part 15: Materials for Oil and Gas and AMREE Oil & Gas III -- Anisotropic behaviors for X100 high grade pipeline steel under stress constraints -- Co-relation of microstructural features with tensile and toughness characteristics of X70 grade steel -- Development and applications of new generation Ni-containing cryogenic steels in China -- Microstructure analysis and weldability investigation of stainless steel clad plate -- Microstructure and Properties of High Performance Pipeline Steels -- Sensitivity variation of nanomaterials at different operating temperature conditions.

Рубрики: Materials science.
   Engineering—Materials.
   Energy systems.
   Characterization and Evaluation of Materials.
   Materials Engineering.
   Energy Systems.
Анотація: This collection highlights materials research and innovations for a wide breadth of energy systems and technologies. The volume includes papers organized into the following sections: Energy and Environmental Issues in Materials Manufacturing and Processing Materials in Clean Power Materials for Coal-Based Power Materials for Energy Conversion with Emphasis on SOFC Materials for Gas Turbines Materials for Nuclear Energy Materials for Oil and Gas.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Liu, Xingbo. \ed.\; Liu, Zhengdong. \ed.\; Brinkman, Kyle. \ed.\; Das, Subodh. \ed.\; Dryepondt, Sebastien. \ed.\; Fergus, Jeffery W. \ed.\; Guo, Zhancheng. \ed.\; Han, Minfang. \ed.\; Hawk, Jeffrey A. \ed.\; Horita, Teruhisa. \ed.\; Hosemann, Peter. \ed.\; Li, Jian. \ed.\; Olivetti, Elsa. \ed.\; Pandey, Amit. \ed.\; Rebak, Raul B. \ed.\; Roy, Indranil. \ed.\; Shang, Chengjia. \ed.\; Zhang, Ji. \ed.\
Вільних прим. немає
Знайти схожі

    Robles Hernandez, Hernandez, Francisco C.
    Al-Si Alloys [Electronic resource] : automotive, Aeronautical, and Aerospace Applications / / Hernandez, Francisco C. Robles Hernandez, Herrera Ramírez, Jose Martin., Mackay, Robert. ; . - 1st ed. 2017. - [S. l. : s. n.]. - XIX, 237 p. 155 illus., 123 illus. in color. - ISBN 9783319583808
Рубрики: Materials science.
   Thermodynamics.
   Heat engineering.
   Heat transfer.
   Mass transfer.
   Transportation.
   Aerospace engineering.
   Astronautics.
   Automotive engineering.
   Characterization and Evaluation of Materials.
   Engineering Thermodynamics, Heat and Mass Transfer.
   Transportation.
   Aerospace Technology and Astronautics.
   Automotive Engineering.
Анотація: This book details aluminum alloys with special focus on the aluminum silicon (Al‐Si) systems – that are the most abundant alloys second only to steel. The authors include a description of the manufacturing principles, thermodynamics, and other main characteristics of Al‐Si alloys. Principles of processing, testing, and in particular applications in the Automotive, Aeronautical and Aerospace fields are addressed. Discusses aluminum silicon alloy selection, manufacturing, applications with particular attention to the issues of mechanical properties and soundness; Includes key technologies for aluminum silicon alloys such as casting, chemical and electromagnetic processing, casting, powder metallurgy, and applications for automotive, and aerospace use; Addresses both, hypo and hypereutectic, alloys and their applications in-depth.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Herrera Ramírez, Jose Martin.; Mackay, Robert.; Robles Hernandez, Francisco C. \.\
Вільних прим. немає
Знайти схожі

10.

    Materials for Chemical Sensing [Electronic resource] / ed.: Cesar Paixão, Thiago Regis Longo., Reddy, Subrayal Medapati. - 1st ed. 2017. - [S. l. : s. n.]. - IX, 268 p. 126 illus., 98 illus. in color. - ISBN 9783319478357
    Зміст:

Рубрики: Materials science.
   Analytical chemistry.
   Nanotechnology.
   Characterization and Evaluation of Materials.
   Analytical Chemistry.
   Nanotechnology and Microengineering.
Анотація: This book covers new materials used as analytical devices for increasing the interactions between the development of new analytical devices and materials science. The authors describe how different types of materials such as polymers, self-assembled layers, phthalocyanines, and nanomaterials can further enhance sensitivity and promote selectivity between analytes for different applications. They explain how continuing research and discussion into materials science for chemical sensing is stimulating the search for different strategies and technologies that extract information for these chemical sensors in order to obtain a chemical fingerprint of samples.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Cesar Paixão, Thiago Regis Longo. \ed.\; Reddy, Subrayal Medapati. \ed.\
Вільних прим. немає
Знайти схожі

11.

    Materials Design and Applications [Electronic resource] / ed. Silva, Lucas F. M. da. - 1st ed. 2017. - [S. l. : s. n.]. - X, 431 p. 269 illus., 175 illus. in color. - ISBN 9783319507842
    Зміст:

Рубрики: Materials science.
   Engineering—Materials.
   Mechanics.
   Mechanics, Applied.
   Characterization and Evaluation of Materials.
   Materials Engineering.
   Solid Mechanics.
Анотація: This volume features fundamental research and applications in the field of the design and application of engineering materials, predominantly within the context of mechanical engineering applications. This includes a wide range of materials engineering and technology, including metals, e.g., polymers, composites, and ceramics. Advanced applications would include manufacturing in the new or newer materials, testing methods, multi-scale experimental and computational aspects. This book features fundamental research and applications in the design of engineering materials, predominantly within the context of mechanical engineering applications such as automobile, railway, marine, aerospace, biomedical, pressure vessel technology, and turbine technology. It covers a wide range of materials, including metals, polymers, composites, and ceramics. Advanced applications include the manufacturing of new materials, testing methods, multi-scale experimental and computational aspects. p.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Silva, Lucas F. M. da. \ed.\
Вільних прим. немає
Знайти схожі

12.

    XAFS Techniques for Catalysts, Nanomaterials, and Surfaces [Electronic resource] / ed.: Iwasawa, Yasuhiro., Asakura, Kiyotaka., Tada, Mizuki. - 1st ed. 2017. - [S. l. : s. n.]. - IX, 556 p. 259 illus., 226 illus. in color. - ISBN 9783319438665
Рубрики: Catalysis.
   Spectroscopy.
   Microscopy.
   Materials science.
   Materials—Surfaces.
   Thin films.
   Nanotechnology.
   Catalysis.
   Spectroscopy and Microscopy.
   Characterization and Evaluation of Materials.
   Surfaces and Interfaces, Thin Films.
   Nanotechnology.
Анотація: This book is a comprehensive, theoretical, practical, and thorough guide to XAFS spectroscopy. The book addresses XAFS fundamentals such as experiments, theory and data analysis, advanced XAFS methods such as operando XAFS, time-resolved XAFS, spatially resolved XAFS, total-reflection XAFS, high energy resolution XAFS, and practical applications to a variety of catalysts, nanomaterials and surfaces. This book is accessible to a broad audience in academia and industry, and will be a useful guide for researchers entering the subject and graduate students in a wide variety of disciplines.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Iwasawa, Yasuhiro. \ed.\; Asakura, Kiyotaka. \ed.\; Tada, Mizuki. \ed.\
Вільних прим. немає
Знайти схожі

13.

    Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) [Electronic resource] / ed. Mason, Paul. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XVI, 381 p. 200 illus. - ISBN 9783319578644
    Зміст:

An Attempt to Integrate Software Tools at Microscale and Above Towards an ICME Approach for Heat Treatment of a DP Steel Gear with Reduced Distortion -- Integrated Microstructure based Modelling of Process-Chain for Cold Rolled Dual Phase Steels -- Improving Manufacturing Quality using Integrated Computational Materials Engineering -- ICME Based Hierarchical Design Using Composite Materials for Automotive Structures -- Towards Bridging the Data Exchange Gap Between Atomistic Simulations and Larger Scale Models -- A Flowchart Scheme for Information Retrieval in ICME settings -- An Ontological Framework for Integrated Computational Materials Engineering -- European Materials Modelling Council -- Facilitating ICME through Platformization -- Bridging the Gap between Bulk Properties and Confined Behavior using Finite Element Analysis -- Ontology Dedicated to Knowledge-driven Optimization for ICME Approach -- Integration of Experiments and Simulations to Build Material Big-Data -- ICME-based Process and Alloy Design for Vacuum Carburized Steel Components with High Potential of Reduced Distortion -- Study of Transient Behavior of Slag Layer in Bottom Purged Ladle: A CFD Approach -- Developing Cemented Carbides through ICME -- CSUDDCC2: An Updated Diffusion Database for Cemented Carbides -- Multi-Scale Modeling of Quasi-Directional Solidification of a Cast Si-rich Eutectic Alloy -- Numerical Simulation of Macrosegregation in a 535 Tons Steel Ingot with a Multicomponent-Multiphase Model -- Validation of CAFE Model with Experimental Macroscopic Grain Structures in a 36-ton Steel Ingot -- Analysis of Localized Plastic Strain in Heterogeneous Cast Iron Microstructures using 3D Finite Element Simulations -- An Integrated Solidification and Heat Treatment Models for Predicting Mechanical Properties of Cast Aluminum Alloy Component -- Linked Heat Treatment and Bending Simulation of Aluminum Tailored Heat Treated Profiles -- Numerical Simulation of Meso-micro structure in Ni-based Superalloy during Liquid Metal Cooling Process -- Multiscale Simulation of \\945-Mg dendrite growth via 3D Phase Field Modeling and Ab-initio First Principle Calculations -- Macro- and Micro-simulation and Experiment Study on Microstructure and Mechanical Properties of Squeeze Casting Wheel of Magnesium Alloy -- Solidification Simulation of Fe-Cr-Ni-Mo-C Duplex Stainless Steel using CALPHAD-coupled Multi-phase-field Model with Finite Interface Dissipation -- Phase-field Modeling of θ’ Precipitation Kinetics in W319 Alloys -- Hybrid Hierarchical Model for Damage and Fracture Analysis in Heterogeneous Material -- Fatigue Performance Prediction of Structural Materials by Multi-Scale Modeling and Machine Learning -- Nano Simulation Study of Mechanical Property Parameter for Microstructure-based Multiscale Simulation -- Multiscale, Coupled Chemo-mechanical Modeling of Bainitic Transformation during Press Hardening -- Development of Microstructure-based Multiscale Simulation Process for Hot Rolling of Duplex Stainless Steel -- A Decision-Based Design Method to Explore the Solution Space for Microstructure after Cooling Stage to Realize the End Mechanical Properties of the Rolled Product -- Influence of Computational Grid and Deposit Volume on Residual Stress and Distortion Prediction Accuracy for Additive Manufacturing Modeling.

Рубрики: Materials science.
   Applied mathematics.
   Engineering mathematics.
   Engineering—Materials.
   Characterization and Evaluation of Materials.
   Mathematical and Computational Engineering.
   Materials Engineering.
Анотація: This book represents a collection of papers presented at the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017), a specialty conference organized by The Minerals, Metals & Materials Society (TMS). The contributions offer topics relevant to the global advancement of ICME as an engineering discipline. Topics covered include the following: ICME Success Stories and Applications Verification, Validation, Uncertainty Quantification Issues and Gap Analysis Integration Framework and Usage Additive Manufacturing Phase Field Modeling Microstructure Evolution ICME Design Tools and Application Mechanical Performance Using Multi-Scale Modeling.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Mason, Paul. \ed.\; Fisher, Charles R. \ed.\; Glamm, Ryan. \ed.\; Manuel, Michele V. \ed.\; Schmitz, Georg J. \ed.\; Singh, Amarendra K. \ed.\; Strachan, Alejandro. \ed.\
Вільних прим. немає
Знайти схожі

14.

    Lecoq, Paul.
    Inorganic Scintillators for Detector Systems [Electronic resource] : physical Principles and Crystal Engineering / / Paul. Lecoq, Gektin, Alexander., Korzhik, Mikhail. ; . - 2nd ed. 2017. - [S. l. : s. n.]. - XVI, 408 p. 226 illus., 44 illus. in color. - ISBN 9783319455228
    Зміст:

Рубрики: Particle acceleration.
   Physical measurements.
   Measurement   .
   Engineering—Materials.
   Crystallography.
   Materials science.
   Nuclear medicine.
   Particle Acceleration and Detection, Beam Physics.
   Measurement Science and Instrumentation.
   Materials Engineering.
   Crystallography and Scattering Methods.
   Characterization and Evaluation of Materials.
   Nuclear Medicine.
Анотація: This second edition features new chapters highlighting advances in our understanding of the behavior and properties of scintillators, and the discovery of new families of materials with light yield and excellent energy resolution very close to the theoretical limit. The book focuses on the discovery of next-generation scintillation materials and on a deeper understanding of fundamental processes. Such novel materials with high light yield as well as significant advances in crystal engineering offer exciting new perspectives. Most promising is the application of scintillators for precise time tagging of events, at the level of 100 ps or higher, heralding a new era in medical applications and particle physics. Since the discovery of the Higgs Boson with a clear signature in the lead tungstate scintillating blocks of the CMS Electromagnetic Calorimeter detector, the current trend in particle physics is toward very high luminosity colliders, in which timing performance will ultimately be essential to mitigating pile-up problems. New and extremely fast light production mechanisms based on Hot-Intraband-Luminescence as well as quantum confinement are exploited for this purpose. Breakthroughs such as crystal engineering by means of co-doping procedures and selection of cations with small nuclear fragmentation cross-sections will also pave the way for the development of more advanced and radiation-hard materials. Similar innovations are expected in medical imaging, nuclear physics ecology, homeland security, space instrumentation and industrial applications. This second edition also reviews modern trends in our understanding and the engineering of scintillation materials. Readers will find new and updated references and information, as well as new concepts and inspirations to implement in their own research and engineering endeavors.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Gektin, Alexander.; Korzhik, Mikhail.; Lecoq, Paul. \.\
Вільних прим. немає
Знайти схожі

15.

    Designing of Elastomer Nanocomposites: From Theory to Applications [Electronic resource] / ed.: Stöckelhuber, Klaus Werner., Das, Amit., Klüppel, Manfred. - 1st ed. 2017. - [S. l. : s. n.]. - XII, 402 p. - ISBN 9783319476964
    Зміст:

Рубрики: Polymers  .
   Materials science.
   Condensed matter.
   Ceramics.
   Glass.
   Composites (Materials).
   Composite materials.
   Polymer Sciences.
   Characterization and Evaluation of Materials.
   Condensed Matter Physics.
   Ceramics, Glass, Composites, Natural Materials.
Анотація: The series Advances in Polymer Science presents critical reviews of the present and future trends in polymer and biopolymer science. It covers all areas of research in polymer and biopolymer science including chemistry, physical chemistry, physics, material science. The thematic volumes are addressed to scientists, whether at universities or in industry, who wish to keep abreast of the important advances in the covered topics. Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist. Review articles for the individual volumes are invited by the volume editors. Single contributions can be specially commissioned. Readership: Polymer scientists, or& nbsp;scientists in related fields interested in polymer and biopolymer science, at universities or in industry, graduate students.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Stöckelhuber, Klaus Werner. \ed.\; Das, Amit. \ed.\; Klüppel, Manfred. \ed.\
Вільних прим. немає
Знайти схожі

16.

    Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials [Electronic resource] / ed. Sumbatyan, Mezhlum A. - 1st ed. 2017. - [S. l. : s. n.]. - XII, 258 p. 92 illus., 30 illus. in color. - ISBN 9789811037979
    Зміст:

Рубрики: Mechanics.
   Mechanics, Applied.
   Materials science.
   Acoustics.
   Acoustical engineering.
   Engineering—Materials.
   Solid Mechanics.
   Characterization and Evaluation of Materials.
   Acoustics.
   Engineering Acoustics.
   Materials Engineering.
Анотація: This volume deals with topical problems concerning technology and design in construction of modern metamaterials. The authors construct the models of mechanical, electromechanical and acoustical behavior of the metamaterials, which are founded upon mechanisms existing on micro-level in interaction of elementary structures of the material. The empiric observations on the phenomenological level are used to test the created models. The book provides solutions, based on fundamental methods and models using the theory of wave propagation, nonlinear theories and composite mechanics for media with micro- and nanostructure. They include the models containing arrays of cracks, defects, with presence of micro- and nanosize piezoelectric elements and coupled physical-mechanical fields of different nature. The investigations show that the analytical, numerical and experimental methods permit evaluation of the qualitative and quantitative properties of the materials of this sort, with diagnosis of their effective characteristics, frequency intervals of effective energetic cutting and passing, as well as effective regimes of damage evaluation by the acoustic methods.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Sumbatyan, Mezhlum A. \ed.\
Вільних прим. немає
Знайти схожі

17.

    Sensors and Instrumentation, Volume 5 [Electronic resource] : proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics 2017 / / ed. Wee Sit, Evro. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - VII, 109 p. 92 illus., 84 illus. in color. - ISBN 9783319549873
    Зміст:

Рубрики: Mechanics.
   Mechanics, Applied.
   Acoustical engineering.
   Materials science.
   Theoretical and Applied Mechanics.
   Engineering Acoustics.
   Characterization and Evaluation of Materials.
Анотація: Sensors and Instrumentation, Volume 5. Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics, 2017, the fifth volume of ten from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Sensors and Instrumentation, including papers on: Sensor Applications Accelerometer Design Accelerometer Calibration Sensor Technology.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Wee Sit, Evro. \ed.\; Walber, Chad. \ed.\; Walter, Patrick. \ed.\; Seidlitz, Steve. \ed.\
Вільних прим. немає
Знайти схожі

18.

    Materials Processing Fundamentals 2017 [Electronic resource] / ed.: Allanore, Antoine., Lambotte, Guillaume., Lee, Jonghyun. - 1st ed. 2017. - [S. l. : s. n.]. - X, 146 p. 85 illus. - ISBN 9783319515809
    Зміст:

Рубрики: Materials science.
   Engineering—Materials.
   Metals.
   Characterization and Evaluation of Materials.
   Materials Engineering.
   Metallic Materials.
Анотація: Covering the physical and numerical modeling of materials processing, this book includes contributions across the range of metals and minerals. This collection offers a unique opportunity to present models and results for key processes involved in extraction, joining, separation, and casting of materials. The corresponding fundamentals of mass and heat transport as well as physical and thermodynamics properties are addressed, allowing for a cross-disciplinary vision of the field.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Allanore, Antoine. \ed.\; Lambotte, Guillaume. \ed.\; Lee, Jonghyun. \ed.\
Вільних прим. немає
Знайти схожі

19.

    Abali, Bilen Emek.
    Computational Reality [Electronic resource] : solving Nonlinear and Coupled Problems in Continuum Mechanics / / Bilen Emek. Abali ; . - 1st ed. 2017. - [S. l. : s. n.]. - XVII, 308 p. 48 illus. in color. - ISBN 9789811024443
    Зміст:

Рубрики: Mechanics.
   Mechanics, Applied.
   Computer mathematics.
   Numerical analysis.
   Materials science.
   Solid Mechanics.
   Computational Science and Engineering.
   Numeric Computing.
   Characterization and Evaluation of Materials.
Анотація: This book presents the theory of continuum mechanics for mechanical, thermodynamical, and electrodynamical systems. It shows how to obtain governing equations and it applies them by computing the reality. It uses only open-source codes developed under the FEniCS project and includes codes for 20 engineering applications from mechanics, fluid dynamics, applied thermodynamics, and electromagnetism. Moreover, it derives and utilizes the constitutive equations including coupling terms, which allow to compute multiphysics problems by incorporating interactions between primitive variables, namely, motion, temperature, and electromagnetic fields. An engineering system is described by the primitive variables satisfying field equations that are partial differential equations in space and time. The field equations are mostly coupled and nonlinear, in other words, difficult to solve. In order to solve the coupled, nonlinear system of partial differential equations, the book uses a novel collection of open-source packages developed under the FEniCS project. All primitive variables are solved at once in a fully coupled fashion by using finite difference method in time and finite element method in space.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Abali, Bilen Emek. \.\
Вільних прим. немає
Знайти схожі

20.

    Model Validation and Uncertainty Quantification, Volume 3 [Electronic resource] : proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics 2017 / / ed. Barthorpe, Robert. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - IX, 378 p. 239 illus., 184 illus. in color. - ISBN 9783319548586
    Зміст:

Chapter1. Lateral vibration attenuation of a beam with piezo-elastic supports subject to varying axial tensile and compressive loads -- Chapter2. Correlation of Non-contact Full-Field Dynamic Strain Measurements with Finite Element Predictions -- Chapter3. Nonlinear Prediction Surfaces for the Estimation of Structural Response of Naval Vessels -- Chapter4. A Case Study in Predictive Modeling Beyond the Calibration Domain -- Chapter5. A Brief Overview of Code and Solution Verification in Numerical Simulation -- Chapter6. Robust Optimization of Shunted Piezoelectric Transducers for Vibration Attenuation Considering Dierent Values of Electromechanical Coupling -- Chapter7. Parameter estimation and uncertainty quantification of mass loaded bushings using model updating -- Chapter8. Vibroacoustic modelling of piano soundboards through analytical approaches in frequency and time domains -- Chapter9. Combined Experimental and Numerical Investigation of Vibro-mechanical Properties of Varnished Wood for Stringed Instruments -- Chapter10. Towards robust sustainable system design – An engineering inspired approach -- Chapter11. Linear Parameter-Varying (LPV) buckling control of an imperfect beam-column subject to time-varying axial loads -- Chapter12. Quantification and Evaluation of Uncertainty in the Mathematical Modelling of a Suspension Strut using Bayesian Model Validation Approach -- Chapter13. Unsupervised Novelty Detection Techniques for Structural Damage Localization: A Comparative Study -- Chapter14. Global load path adaption in a simple kinematic load-bearing structure to compensate uncertainty of misalignment due to changing stiffness conditions of the structure's supports -- Chapter15. Assessment of Uncertainty Quantification of Bolted Joint Performance -- Chapter16. Sensitivity Analysis and Bayesian Calibration for 2014 Sandia Verification and Validation Challenge Problem -- Chapter17. Non-probabilistic uncertainty evaluation in the concept phase for airplane landing gear design -- Chapter18. Modular Analysis of Complex Systems with Numerically Described Multidimensional Probability Distributions -- Chapter19. Methods for Component Mode Synthesis Model Generation for Uncertainty Quantification -- Chapter20. Parameterization of Large Variability using the Hyper-Dual Meta-Model -- Chapter21. Similitude Analysis of the Frequency Response Function for Scaled Structures -- Chapter22. MPUQ-b: Bootstrapping based Modal Parameter Uncertainty Quantification - Fundamental Principles -- Chapter23. MPUQ-b: Bootstrapping based Modal Parameter Uncertainty Quantification – Methodology and Application -- Chapter24. Evaluation of Truck-Induced Vibrations for a Multi-Beam Highway Bridge -- Chapter25. Innovations and Info-Gaps: An Overview -- Chapter26. Bayesian optimal experimental design using asymptotic approximations -- Chapter27. Surrogate-Based Approach to Calculate the Bayes Factor -- Chapter28. Vibrational Model Updating of Electric Motor Stator for Vibration and Noise Prediction -- Chapter29. A Comparison of Computer-Vision-Based Structural Dynamics Characterizations -- Chapter30. Sequential Gauss-Newton MCMC Algorithm for High-Dimensional Bayesian Model Updating -- Chapter31. Model Calibration with Big Data -- Chapter32. Towards Reducing Prediction Uncertainties in Human Spine Finite Element Response: In-vivo Characterization of Growth and Spine Morphology -- Chapter33. Structural Damage Detection Using Convolutional Neural Networks -- Chapter34. Experimental model validation of an aero-engine casing assembly -- Chapter35. Damage Detection in Railway Bridges under Moving Train Load -- Chapter36. Multi-Fidelity Calibration of Input-Dependent Model Parameters -- Chapter37. Empirically Improving Model Adequacy in Scientific Computing -- Chapter38. Mixed geometrical-material sensitivity analysis for the study of complex phenomena in musical acoustics -- Chapter39. Experimental Examples for Identification of Structural Systems Using Degree of Freedom-Based Reduction Method.

Рубрики: Vibration.
   Dynamical systems.
   Dynamics.
   Quality control.
   Reliability.
   Industrial safety.
   Materials science.
   Acoustical engineering.
   Vibration, Dynamical Systems, Control.
   Quality Control, Reliability, Safety and Risk.
   Characterization and Evaluation of Materials.
   Engineering Acoustics.
Анотація: Model Validation and Uncertainty Quantification, Volume 3: Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics, 2017, the third volume of ten from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Model Validation and Uncertainty Quantification, including papers on: Uncertainty Quantification in Material Models Uncertainty Propagation in Structural Dynamics Practical Applications of MVUQ Advances in Model Validation & Uncertainty Quantification: Model Updating Model Validation & Uncertainty Quantification: Industrial Applications Controlling Uncertainty Uncertainty in Early Stage Design Modeling of Musical Instruments Overview of Model Validation and Uncertainty.
Есть полнотекстовые версии (для доступа требуется авторизация)

Дод.точки доступу:
Barthorpe, Robert. \ed.\; Platz, Roland. \ed.\; Lopez, Israel. \ed.\; Moaveni, Babak. \ed.\; Papadimitriou, Costas. \ed.\
Вільних прим. немає
Знайти схожі

1-20 21-40 41-60 61-80 81-100 101-104

Бази даних

Ресурси порталу Springer Link (доступ через IP-адреси ЗДМУ)- результати пошуку

Вид пошуку